Cleaning Exposed Aggregate: Keep the Texture, Lose the Grime
Exposed aggregate is one of the most popular concrete finishes across Bundaberg. You'll find it on driveways, pool surrounds, patios, front paths and entertaining areas. The surface is hard-wearing and slip-resistant, and it looks great when it's clean. The same textured finish that gives it character also traps dirt, algae, mould and stains in the tiny gaps between the stones. This guide explains how to clean exposed aggregate properly so you keep the texture and avoid damaging the surface.
Why Exposed Aggregate Gets Dirty So Easily
Exposed aggregate is made by removing the top layer of cement paste from a concrete slab. This reveals the decorative stones underneath, such as pebbles, quartz or crushed granite. The result is a bumpy surface with far more surface area than flat, broom-finished concrete. That makes it grip better underfoot, but it also gives grime plenty of places to settle.
Bundaberg's climate adds to the challenge. Warm temperatures, high humidity and regular summer rain create ideal conditions for biological growth. Shaded areas under trees, along fence lines and on the south side of houses tend to develop green algae and black mould quickly. Other common problems include:
- Algae and mould: Green, grey or black patches, especially in damp, shaded spots.
- Tannin stains: Brown marks from fallen leaves, flowers and fruit from trees like mango, jacaranda and palms.
- Oil and grease: Drips from vehicles on driveways and carports.
- Rust stains: Orange marks from metal furniture, bore water, or fertiliser containing iron.
- Red soil and dust: Local soils, especially around the region's farming areas, can leave a stubborn tint on lighter aggregate.
- Efflorescence: White, powdery salt deposits that rise to the surface as moisture moves through the concrete.
Know Your Surface Before You Start
Before you pick a cleaning method, take a few minutes to assess the surface. Check whether the aggregate is sealed, how old the slab is, and whether the stones are firmly bedded in. Older exposed aggregate, particularly slabs more than 15 to 20 years old, can have stones that are starting to loosen. Aggressive cleaning on those surfaces can pop stones out and leave pitted patches.
To check whether the surface is sealed, sprinkle a little water on it. If the water beads up, a sealer is probably still working. If it soaks in and darkens the concrete quickly, the sealer has worn away or was never applied. This matters because sealed and unsealed surfaces respond differently to cleaning products, and unsealed aggregate will absorb stains more readily.
Start With the Gentle Approach
Always begin with the least aggressive method and work up only if needed. This protects the stones and the cement bond holding them in place.
Sweep and Pre-Rinse
Remove loose debris with a stiff broom or leaf blower, paying attention to the gaps and edges where leaves and dirt collect. Then wet the surface with a garden hose. Pre-wetting stops cleaning solutions from soaking deep into dry concrete and helps you see which areas are the worst.
Scrub With a Mild Solution
For general dirt and light algae, mix a mild detergent with warm water and scrub with a stiff nylon-bristle broom. Avoid wire brushes, which can scratch the stones and leave rust particles behind. Work in small sections, let the solution sit for 10 to 15 minutes, then rinse thoroughly.
Treat Mould and Algae
For green and black growth, a diluted sodium hypochlorite solution (the active ingredient in pool chlorine and many household bleaches) is commonly used. Apply it according to the product label, keep it off nearby plants and lawn, and rinse well afterwards. Many outdoor mould and algae removers made for concrete and pavers are also available from local hardware stores, and some are designed to keep working for weeks after application, which helps in Bundaberg's humid conditions.
Pressure Washing Exposed Aggregate Safely
High-pressure cleaning is the fastest way to clean large areas, and it's the most common cause of damage on exposed aggregate when done wrongly. Too much pressure or too close a nozzle can blast out stones, erode the cement paste between them, and leave a rough, uneven surface.
Follow these guidelines to reduce the risk:
- Use a pressure setting of around 2,000 to 2,500 PSI for sound, well-bonded surfaces, and go lower for older slabs.
- Choose a wide fan tip, such as 25 or 40 degrees, rather than a narrow, concentrated jet.
- Hold the nozzle at least 30 centimetres from the surface and keep it moving in even, overlapping passes.
- Never use a rotary or turbo nozzle on exposed aggregate, as it can gouge the surface.
- Test a small, inconspicuous area first to see how the surface reacts.
- Rinse away all runoff and detergent residue once you finish.
If you notice stones coming loose during cleaning, stop immediately and reduce the pressure. Loose stones are a sign the surface may https://andydrpz740.swiftnestly.com/posts/does-pressure-cleaning-ruin-grout-on-outdoor-patios need repair or resealing rather than more aggressive cleaning.
Tackling Specific Stains
Oil and Grease
Fresh oil should be blotted with an absorbent material such as kitty litter or sawdust, then left for several hours before sweeping away. For older stains, use a concrete degreaser and scrub it into the surface with a stiff brush. Deep stains may need a poultice, which is an absorbent paste that draws oil out of the concrete as it dries. Repeat applications are often necessary.
Rust Stains
Rust marks respond to products specifically formulated for rust removal on concrete. Be cautious with strong acids on exposed aggregate, as they can etch the cement and dull the stones. Always follow label directions, test in a hidden spot first, and neutralise and rinse thoroughly afterwards.
Tannin and Leaf Stains
Brown organic stains usually lift with an oxygen-based cleaner or a mild bleach solution and a good scrub. Clearing leaves and fallen fruit promptly stops these stains from setting in the first place.
Efflorescence
Dry brushing often removes light white deposits. For stubborn efflorescence, a specialised efflorescence remover is the safest option. If it keeps returning, there may be a moisture issue such as poor drainage or water running under the slab, and that should be addressed at the source.
Seal the Surface to Make Future Cleaning Easier
Once the aggregate is clean and completely dry, sealing is the best way to protect it. A good penetrating or film-forming sealer designed for exposed aggregate helps repel water, oil and stains, and makes routine cleaning much easier. Sealers also enhance the colour of the stones, giving that fresh, just-poured look.
Some points to keep in mind when sealing:
- Allow the slab to dry fully, usually at least 24 to 48 hours after cleaning, longer in humid weather.
- Choose a sealer suited to the use. Driveways need products that resist hot tyre marks, while pool surrounds need slip-resistant finishes.
- Check slip-resistance after sealing, particularly around pools and wet areas. Some sealers can be slippery unless anti-slip additives are included.
- Apply thin, even coats and avoid pooling in the low spots between stones.
- Plan to reseal every two to five years, depending on the product, sun exposure and traffic.
Routine Maintenance for Bundaberg Conditions
Regular upkeep takes far less effort than restoring a neglected surface. A few simple habits go a long way:
Sweep or blow off debris weekly, or more often during autumn leaf drop and storm season. Rinse the surface with a hose periodically to remove dust and salts. Treat any green or black patches early, before they spread. Trim back overhanging branches to improve sunlight and airflow in shaded areas, and make sure gutters and downpipes aren't discharging water across the slab. Wipe up spills, particularly oil, as soon as they happen.
Environmental and Safety Considerations
When you clean outdoor surfaces, wash water can carry detergents, chlorine and contaminants into stormwater drains, which flow to local waterways. Where possible, direct runoff onto lawn or garden beds that can handle it, avoid using harsh chemicals near drains, and choose biodegradable products. Wear eye protection, gloves and non-slip footwear, and keep children and pets away from treated areas until they're rinsed and dry. Never mix cleaning products, especially bleach with acids or ammonia, as the fumes can be dangerous.

When to Call a Professional
DIY cleaning suits most routine jobs, but a professional is worth considering if you're dealing with large areas, deep stains, loose or missing stones, or a surface that has never been sealed. Professionals have commercial-grade equipment, surface cleaners that produce an even finish, and the experience to adjust pressure and chemicals for the condition of your concrete. They can also repair damaged sections and apply sealer properly, which is often where the biggest long-term difference is made.
Final Thoughts
Exposed aggregate rewards a bit of care. Start gently, use the right products for each type of stain, keep pressure under control, and finish with a quality sealer to lock in the results. With regular maintenance suited to Bundaberg's warm, humid climate, your driveway, patio or pool surround can keep its texture, colour and slip resistance for decades, without the grime.
Bundaberg Pressure Cleaning
(07) 4158 8067